New Home Services

Log preparation is the foundation for a beautiful finish. Any unwanted imperfections will show through in the end product. The following services can be used in combination or alone before applying the finishes to achieve the optimal look.

Grinding of the log ends seals the log fibers presenting a smooth, defined face.

Corn Cob Blasting of the log surfaces removes grease, stamps, chalk marks, water stains, graying from unprotected exposure, and other surface discolorations. This process evens the color and texture of the logs and wonderfully prepares them to accept stains and or finishes.

Complete hand sanding of the logs can make your interior logs seem like fine furniture.

A Pressure Wash will remove dust, dirt, and debris from the logs. At a minimum, use this step for normal construction cleaning or coupled with the above services.

Pene Treat, a borate based wood preservative and insecticide can be applied to the bare wood to reduce the chance for insect infestation and will also help preserve the integrity of the wood.

The look of your home requires you to make selections from a variety of stains varying in color, transparency, and sheen. Although we will apply any product that you choose, we prefer to use Sashco log finishes. These products are high quality, allow for an easy maintenance program and are compatible with all of their other sealants. Product compatibility is an issue that should be addressed prior to any application to insure proper long term adhesion.

For the interior, we recommend a higher sheen or glossiness for easier cleaning. Also, remember that lighter colors make a room look larger and brighter, while dark colors impart a cozy feel.

The exterior of your home is truly important for shedding off the harsh elements. The intense sun at higher altitudes coupled with the dryness of climate can really take its toll on your logs if unprotected. High quality products ensure a long lasting appearance and routine maintenance is a must. The two coat Capture/Cascade system, by Sashco, allows for this maintenance program. A one time first color coat of Capture is sprayed on and back brushed in to impart as much material into the wood as possible. This coating is then topped by one coat of Cascade, a clear weather repellant. After two years and then as needed, depending of the exposure, an application of Cascade is all that is required to maintain the log finish – no color matching or discoloration of your chinking.

A complete seal is needed to keep out water, wind and insects. Caulking or Chinking can be used between the logs, around rough openings, in corners, gables, and where logs meet stucco, stone, siding or other materials. A double seal, inside and out, is best, however, the extent of the seal is at your discretion.

In a full round log home the gaps between the logs are filled with Chinking. Chinking comes in many colors to either blend or contrast with the color of your logs and is most commonly used in other areas, such as corners, when you want the joints to be seen. Caulking, on the other hand, is used when you want the seal to be hidden by using a color that matches the stain.

From creating log accents or railings to putting copper caps on the tops of deck posts, our log carpentry services can finish up those log details.

After the shell is set, let TSS take care of the rest!